Galaxy DX-2547 Specs
Complete Galaxy DX-2547 Specs
Back to Main Galaxy DX 2547 Page
GENERAL Specs
Model Galaxy DX 2547
Frequency Range: 26.965 - 27.405 MHz (40 Channels)
Emission Modes: AM/USB/LSB
Frequency Control: Phase Lock Loop (PLL) Synthesizer
Frequency Tolerance: 0.005 %
Frequency Stability 0.001 %
Operating Temperature Range: -30°C to +50°C
Microphone Dynamic PTT, 500 Ohms
Input Voltage (DC/AC Selectable) 13.8V DC / 110V AC 60Hz
Current Drain: Transmit (AM full mod.) < 3.5A
Current Drain : Receive (Squelched) £ 0.5A
Current Drain : Receive (Max. audio output) < 1A
Antenna Connector: UHF; SO239
Dimensions: 4-3/4"H x 11-1/4"W x 13-1/2"D
Weight: 12 lb.
TRANSMITTER
RF Power Output: AM : 4W / SSB : 12W PEP
RF Transmit Modes: AM/SSB
Modulation: High and Low level Class B, Amplitude Modulation : AM and SSB
Spurious Emissions: -60 dB
Carrier Suppression: -60 dB
Audio Frequency Response: 300 to 2500 Hz
Antenna Impedance: 50 Ohms
Output Indicators: Meter shows relative signal strength, RF output power, SWR and AM Modulation
level. Transmit LED glows red when transmitter is in operation.
RECEIVER
Sensitivity for 10dB S/N (AM/ SSB): < 0.5 mV / < 0.15 mV
IF Frequency: AM: 10.695 MHz 1st IF, 455 KHz 2nd IF
Image Rejection: -50 dB
Adjacent Channel Selectivity: -60 dB
RF Gain Control: 45 dB adjustable for optimum signal reception
Automatic Gain Control (AGC) Figure of Merit: 100 mV for 10 dB Change in Audio Output
Squelch: Adjustable; threshold less than 0.5 mV
Noise Blanker: RF type
Audio Output Power: 2.5W @ 10% THD
Audio Frequency Response: 300 to 2500 Hz
Built-in Speaker Impedance: 8 Ohms, 4 Watts
External Speaker (Not Supplied) Specs 8 Ohms and 4 Watts
Back to Main Galaxy DX 2547 Page
GENERAL Specs
Model Galaxy DX 2547
Frequency Range: 26.965 - 27.405 MHz (40 Channels)
Emission Modes: AM/USB/LSB
Frequency Control: Phase Lock Loop (PLL) Synthesizer
Frequency Tolerance: 0.005 %
Frequency Stability 0.001 %
Operating Temperature Range: -30°C to +50°C
Microphone Dynamic PTT, 500 Ohms
Input Voltage (DC/AC Selectable) 13.8V DC / 110V AC 60Hz
Current Drain: Transmit (AM full mod.) < 3.5A
Current Drain : Receive (Squelched) £ 0.5A
Current Drain : Receive (Max. audio output) < 1A
Antenna Connector: UHF; SO239
Dimensions: 4-3/4"H x 11-1/4"W x 13-1/2"D
Weight: 12 lb.
TRANSMITTER
RF Power Output: AM : 4W / SSB : 12W PEP
RF Transmit Modes: AM/SSB
Modulation: High and Low level Class B, Amplitude Modulation : AM and SSB
Spurious Emissions: -60 dB
Carrier Suppression: -60 dB
Audio Frequency Response: 300 to 2500 Hz
Antenna Impedance: 50 Ohms
Output Indicators: Meter shows relative signal strength, RF output power, SWR and AM Modulation
level. Transmit LED glows red when transmitter is in operation.
RECEIVER
Sensitivity for 10dB S/N (AM/ SSB): < 0.5 mV / < 0.15 mV
IF Frequency: AM: 10.695 MHz 1st IF, 455 KHz 2nd IF
Image Rejection: -50 dB
Adjacent Channel Selectivity: -60 dB
RF Gain Control: 45 dB adjustable for optimum signal reception
Automatic Gain Control (AGC) Figure of Merit: 100 mV for 10 dB Change in Audio Output
Squelch: Adjustable; threshold less than 0.5 mV
Noise Blanker: RF type
Audio Output Power: 2.5W @ 10% THD
Audio Frequency Response: 300 to 2500 Hz
Built-in Speaker Impedance: 8 Ohms, 4 Watts
External Speaker (Not Supplied) Specs 8 Ohms and 4 Watts
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |